Poolife pH Minus

Poolife pH Minus

Product Details

pH Minus balancer lowers the pH of swimming pool water. The ideal pH range is 7.2 - 7.6. Maintaining a pH level above 7.6 keeps your sanitizer from working effectively and can cause scale, eye irritation and skin discomfort. This product also lowers the total alkalinity of swimming pool water.

Products Benefits

• Allows your sanitizer to work more effectively
• Reduce equipment corrosion
• Reduce eye irritation
• Reduce skin dryness

Routine Maintenance

• Measure the pH of the pool water with a suitable test kit
• Broadcast product evenly over the surface of the pool water, if a deep end is applicable add product to deepest section of the pool
• If for a shallow water 4 ft or less dissolve in a clean bucket of warm water first then add directly to the pool

Directions for Use and Dosage

To Lower pH:

• Try to keep your pH levels between 7.2 – 7.8
• Use this product if pH goes above 7.8
• Proper dosages will vary
• The proper dosage is determined by your current pH and volume of pool water
• First, test current pH. Then refer to product label for proper dosage to adjust pH

To Lower Total Alkalinity:

• Add the product in one localized area at the deepest end of the pool: this will create a localized pocket of low pH, which will lower your total alkalinity
• Total alkalinity (TA) should be in the range of 80 – 120 ppm
• Adding 2 lbs. per 10,000 will lower TA by 10 ppm
• Do not exceed 2 lbs. per 10,000 gallons per day: if additional adjustment is needed, add the following day

• ALWAYS ADD product directly to pool
• DO NOT allow product to contact other water treatment products
• For best results do not allow this product to get wet before use.
• DO NOT allow this product to mix directly with any other water balancing or sanitizer products.

Water Balancing

To provide optimum product performance, swimmer comfort and crystal-clear water always maintain pH from 7.2 to 7.6, total alkalinity from 80 to 120 parts per million (ppm) and calcium hardness above 200 ppm. Test frequently making sure the necessary adjustments are made accordingly

Product Available Sizes

• Available in two pound container
• Available in seven pound bulk container
• Available in twenty-five pound bulk bucket

Ingredients

• Sodium Bisulfate: 92%
• Other Ingredients: 8%