poolife pH Plus

Poolife pH Plus

Product Details

Poolife pH Plus raises the ph level in your swimming pool. Avoid eye and skin irritation and discomfort by maintaining a ph level of 7.2-7.6 ppm.

Products Benefits

• Raise the pH in your swimming pool
• Maintains pH level of 7.2 - 7.6
• Quick dissolving
• Correct pH provides optimum swimmer comfort
• Use the convenient dosage chart on the product label

Maintenance, Dosage and Directions for Use

• Add the recommended dosage of this product while the filter pump is running
• Broadcast product evenly over the surface of the pool water, if a deep end is applicable add product to deepest section of the pool
• If for water ever reason granules settle to the bottom of pool use a brush to disperse
• Always adjust total alkalinity prior to adjusting pH
• DO NOT add product to floaters or feeders 
• ALWAYS ADD product directly to pool
• DO NOT premix this product
• For best results do not allow this product to get wet before use.
• DO NOT allow this product to mix directly with any other water balancing or sanitizer products.

Water Balancing

To provide optimum product performance, swimmer comfort and crystal-clear water always maintain pH from 7.2 to 7.6, total alkalinity from 80 to 120 parts per million (ppm) and calcium hardness above 200 ppm. Test frequently making sure the necessary adjustments are made accordingly

Opening Your Pool

For best results follow the " WATER BALANCING"  section label on this product. Allow 4 hours for product to disperse. Check again using a suitable test kit for a pH reading in the pool between 7.2 and 7.6 

Product Available Sizes

• Available in two pound bulk canister
• Available in five pound bulk canister
• Available in twenty-five pound bulk pail

Ingredients

• Sodium Carbonate: 99%, 
• Constituents Ineffective as Adjuvants: 1%