DETAILS
The NST® System includes everything you need to oxidize, sanitize and remove algae from your pool. The NST® Prime Sanitizer uses our proprietary slow-dissolving Cal Hypo technology, which clarifies without adding any Cyanuric Acid (CYA) to your pool water. That means it eliminates bacteria, contaminants and algae without overstabilizing for sparkling clear water that’s ready for fun, all summer long.
System includes:
Poolife® NST® Prime Tablets (20.2 lbs Bucket)
Poolife® NST® Purify (12 individual 1 lb bags)
Poolife® NST® Patrol ( 32 oz bottle)
How to use:
Step 1: Sanitize pool water with Poolife® NST® Prime Tablets.
Step 2: Shock pool water weekly with Poolife® NST® Purify.
Step 3: Kill and prevent algae with Poolife® NST® Patrol.
Poolife NST Extended Release Tablets (Non Stabilized) (Step 1)
Product Details
Poolife Exclusive Pool Care Collection NST Prime Extended Release Tablets are an alternative to 3" Tablets and does not contain cyanruic acid. Perfect for use in a skimmer, this product will destroy bacteria and other organic contaminants without over stabilizing your pool or adding additional Cyanruic Acid to your water. Each long lasting tablet will continuosly sanitize your pool in the skimmer for up to one week. This product is an innovative, patented technology that provides long lasting, slow dissolving clorination. Its compariable for use with pools equipped with salt chlorine generators to help maintain the proper sanitization level. NST Tablets are only to be used in the skimmer. DO NOT PLACE IN FLOATING FEEDERS OR INLINE/OFFLINE CHLORINATORS.
Products Benefits
- Does not contain cyanruic acid
- Will not over stabilize water
- Will continuosly sanitize your pool in the skimmer for up to one week
- Tablet is compatible with chlorine, salt generators, ozone and mineral systems.
- Slower dissolving formula
Routine Chlorination, Maintenance, and Dosage
- 1 tablet per 10,000 gallons of water per week or as need to maintain chlorine level of 1-4 ppm
- The dosage may vary depending upon bather load, water temperature, water volume and other conditions
- Pool should not be entered until the chlorine residual is 1-4 ppm as measured
- As a preventative treatment, you should shock treat the pool with a shock product weekly to burn out organic material and to keep water sparkling clear.
Shock Treatment
Always use Poolife Exclusive Pool Care Collection Shock products for regular shock treatment. Additional shocking to keep water clean and clear is recommended after wind and heavy rain, high number of swimmers, increased water temperature, and or increased pool usage. Poolife Exclusive Pool Care Quick Swim Oxidizer is recommended for use in congunction with NST Tablets.
Directions for Use
For best results use only in pools with a skimmer basket. Do not allow this product to get wet before use. Do not allow this product to mix directly with any other water balancing or sanitizer products. Make sure the skimmer is completely free of any other water treatment products before adding tablet.
- DO NOT add product to floaters or feeders
- DO NOT allow product to contact other water treatment products
- Skimmer basket should be free of all other water treatment productsbefore adding recommended amount of this product
- DO NOT throw tablets directly into pool
- DO NOT use with any other tablets or sticks in the same skimmer
- DO NOT premix this product
Water Balancing
To provide optimum product performance, swimmer comfort and crystal-clear water always maintain Ph from 7.2 to 7.6, total alkalinity from 80 to 120 parts per million (ppm) and calcium hardness above 200 ppm. Test frequently making sure the necessary adjustments are made accordingly
Opening Your Pool
Balance pool water, shock treat, or super chlorinate with a Poolife Exclusive Pool Care Shock Product Such as Turbo Shock, Clean Shock, or Quick Swim Oxidizer
Ingredients
- Calcium Hypochlorite: 70.2%
- Other Ingredients: 29.8%
Poolife NST Purify ( Formally Quick Swim Oxidizer)
Re-Branded for 2022 season
Product Details
Poolife NST Purify (FORMALLY QUICK SWIM OXIDIZER) is a blend of a powerful oxygen-based oxidizer and a chlorinating agent combined with a pH buffer and a dry clarifier. This formulation provides the benefits of oxygen-based oxidization while boosting free chlorine concentrations. This one-two punch keeps water sparkling clear by oxidizing and eliminating organic contaminants without affecting water balance. Since this product is buffered pH and alkalinity remain unchanged. The addition of the the clarifier aids in the oxidation/filtration process so water contaminants are more readily removed by filtration. Formulated to prevent dull and hazy water
Products Benefits
- Oxidizing and chlorinating agent 2 in 1 product
- pH buffer will not affect other chemicals
- Built in powder clarifier
- Boosts free chlorine concentrations
- Swim again in just 15 minutes quick and effective
Routine Chlorination, Maintenance, and Dosage
- Add this product to your pool water every week to oxidize contaminants introduced by bathers, and to maintain sparkling crystal clear pool water. Addition of 16 oz per week or when lunch is served and everyone exits the pool. Sprinkle in giving a boost to the chlorine. People may resume swimming in 15 minutes.
Directions for Use
Always add with the pump and filter running to ensure complete mixing and good circulation. Quick Swim Oxidizer is completely soluble and dissolves quickly so no premixing is required. Broadcast this product uniformly over the surface of the water, adding about two thirds of the total dose into the deep end of the pool. Apply product when swimming pool is not in use.Swimming may resume in 15 minutes as long as the residual chlorine level is within the desired 1 to 4 ppm.
- DO NOT add product to floaters or feeders
- ALWAYS ADD product directly to pool
- DO NOT allow product to contact other water treatment products
- DO NOT premix this product
- For best results do not allow this product to get wet before use.
- DO NOT allow this product to mix directly with any other water balancing or sanitizer products.
For Pools with "Moderate" daily use
- Add at a dose of 1 pound per 10,000 gallons
- Each pound of the product will raise the free chlorine concentration by 1 ppm in 10,000 gallons
- For frequent or heavier doses may be required following heavy rains or strong winds
For Pool "Opening" and "Closing"
- Add this product at a dose of 2 pounds per 10,000 gallons of pool water
- This product will provide sufficient oxidizer to eliminate most of the contaminants that accumulate in pool water and will immediately raise the free chlorine concentration by 2 ppm in 10,000 gallons of water
Product Available Sizes
- Available in one pound individual bags
- Available in 12 pack one pound individual bags (1 Case)
- Available in 24 pack one pound individual bags (2 Case)
Ingredients
- Sodium dichloro-s-triazinetrione: 15%
- Other Ingredients: 85%
- Available Chlorine: 9.53%
NST Patrol (Step 3)
Description
Poolife NST Patrol is a highly effective pool algaecide that is designed to work in conjunction with the NST Prime Collection. This algae remover will target and kill green and black algae growths, as well as help prevent them from forming in the future. It will not foam, harm pool surfaces or damage equipment.
Dosage
Initial Dose:
Add 5 1/4 fluid ounces of NST Patrol per 10,000 gallons of pool water.
Maintenance Dose:
Add 1 1/4 fluid ounces of this product per 10,000 gallons of pool water.
Directions
Initial Dose:
Add 5 1/4 fluid ounces of NST Patrol per 10,000 gallons of pool water.
Initial dose is used when filling pool or upon conversion to Poolife. If pool has visible algae growth, treat with initial dose. Vacuum pool after 24 hours to remove algae debris. If visible algae are still present or reappear repeat this treatment procedure as necessary. When pool is free of visible algae, use the recommended maintenance dose. For persistent algae or slime producing microorganism growth, add 5 - 7 1/2 fluid ounces of this product per 10,000 gallons of pool water into the skimmer with the filter pump running. After one minute, shut off the pump and allow the system to remain off overnight. The following day, restart the filter and add 5 - 7 1/2 fluid ounces of this product per 10,000 gallons. Run the filter continuously for 24 - 48 hours, brushing the sides of the pool frequently.
Maintenance Dose:
Add 1 1/4 fluid ounces of this product per 10,000 gallons of pool water. Maintenance doses should be added weekly. If high temperatures prevail or pool has unusually heavy use, add a maintenance dose more frequently. Maintenance doses should always be added after a heavy rainfall.
Winterization:
When swimming season is over, add initial dose prior to closing pool. This dose helps provide a measure of control of algae growth during winter months. This treatment will also help the servicing of the pool before it is returned to use the following season.
Ingredients
- n-Alkyl (60% C14, 30% C16, 5% C12 and 5% C18) dimethyl benzyl ammonium chloride: 49.8%
- Methyl benzyl ammonium chloride: 0.2%
- Other Ingredients: 50%
