Poolife Calcium Plus

DETAILS

Poolife Calcium Plus raises the calcium hardness level of your swimming pool. Prevent corrosion of your metal and plaster surfaces by maintaining a calcium level in the range of 200-500 ppm.

Products Benefits

• Maintain a calcium level of 200 ppm to 500 ppm

Dosage and Routine Maintenance

• Add the recommended dosage of this product per volume of pool water while the filter pump is running
• Broadcast product evenly over the surface of the pool water, if a deep end is applicable add product to deepest section of the pool
• If for whatever reason granules settle to the bottom of pool use a brush to disperseIf
• If a large amount of Poolife Calcium plus is required (more than 50 ppm addition), add in 1/3 increments, allowing 4-6 hours between additions.

Directions for Use

For best results do not allow this product to get wet before use. Do not allow this product to mix directly with any other water balancing or sanitizer products.Always add directly to the pool

• DO NOT add product to floaters or feeders 
• ALWAYS ADD product directly to pool
• DO NOT allow product to contact other water treatment products
• DO NOT premix this product
• Do not allow this product to get wet before use.
• DO NOT allow this product to mix directly with any other water balancing or sanitizer products.

Water Balancing

To provide optimum product performance, swimmer comfort and crystal-clear water always maintain pH from 7.2 to 7.6, total alkalinity from 80 to 120 parts per million (ppm) and calcium hardness above 200 ppm. Test frequently making sure the necessary adjustments are made accordingly

Opening Your Pool

For best results follow the " WATER BALANCING"  section label on this product. Allow 30 minutes for product to disperse. Check again using a suitable test kit for a free chlorine residual in the pool between 1-4 ppm (closer to 4 ppm for opening)

Product Available Sizes

• Available in eight pound bulk
• Available in twenty pound bulk